Safety requirements for plate shears

  After shearing, the shearing machine should ensure the straightness and parallelism of the shearing surface of the sheared sheet, and reduce the distortion of the sheet as far as possible, so as to obtain high-quality shearing parts. The upper blade of the plate shearing machine is fixed on the tool rest and the lower blade is fixed on the working table. A pallet ball is installed on the worktable so that the plate is not scratched when sliding on it. The rear stop is used for plate positioning, and the position is adjusted by the motor. The press cylinder is used to press the plate to prevent it from moving during shearing. Guardrails are safety devices to prevent accidents at work. The return journey is usually made by nitrogen, with high speed and low impact.

  Shears operating procedures safety motor, foot switch surface should be clean, no other objects are allowed around. Work table, scissors mouth, equipment link is not allowed to have any objects, or boot must be removed before. When cutting material handling operation, the staff must use labor insurance supplies reasonably to avoid scratching hands and feet. Wear protective glasses when cutting aluminum. The safety bars on the shears shall not be arbitrarily removed. After equipment maintenance, all safety devices can be installed before production. Before starting the machine, check whether the protection devices and parts of each part of the shears are firm and reliable, or they should be adjusted. Check whether the equipment and power switch, foot clutch, brake are normal.