Tube-plate all-in-one machine
Published date:2019-02-19 Views:169
Optical fiber laser tube all-in-one both the function of laser cutting machine and laser cutting machine, can complete cut sheet metal and metal pipe, because of its compatibility problem, however, in the cut metal thickness range, or pipe diameter range without a single powerful function, after all, now the laser cutting machine has reached to 15000 watts, laser cutting machine also has reached to 3000 watts (can accept customized according to customer's actual demand), they can easily help the majority of users to solve practical problems.
Now with the hope of laser intelligent equipment g6020mfp-ipg4000 fiber laser plate and tube all-in-one machine as an example, the main characteristics are described.
The main machine machine of fiber laser plate and tube integrated machine is composed of bed, beam, exchange table, z-axis device, operation control part, air way, water way and other parts.
Laser cutting machine is made by laser beam by the total reflection mirror laser beam into a straight down, then through the lens focus, focus on the place together into a tiny spot, light irradiation on the materials, the material was quickly heated to evaporation temperature, evaporation hole formation, with the moving of the beam on the material, and comply with auxiliary gases (carbon dioxide, oxygen, nitrogen, etc.) molten slag blown away, make the holes form the kerf width is very narrow, straight to material cutting. It has flight fast cutting technology, 6mm carbon steel 0 second perforation technology, 6mm stainless steel, aluminum alloy compressed air cutting technology.
The pipe cutting machine adopts the left end of the flat plate to add all pipe devices, pipe cutting is limited to round pipe, square pipe and rectangular section pipe. The front end chuck and the rear end chuck adopt automatic clamping method. Double chuck adopts double synchronous motor drive to ensure the rotation precision of pipe. The pipe material is fed from the left rear end of the machine tool, and the finished product is fed from the left front end of the machine tool.
Laser plate and tube integrated cutting head parts imported brands, efficient, stable, easy to use.
With the continuous progress of science and technology, we hope that the research and development of laser in the laser field will also be deepened continuously. In the future, we will develop more products that satisfy users and apply them in a wider range to achieve mutual benefit and win-win situation and complete the upgrading of industrial intelligence.
Product parameters：
|
|
Lathe bed is introduced Bed for the overall plate welding, the body is heavy, heavy weight, after the welding, the overall heat treatment equipment, placed in the machine gantry processing center, high-precision processing, bed can also be customized according to customer requirements, can be customized for cast iron bed. |
 |
Laser head introduction：RAYTOOLS Laser cutting head The laser cutting head adopts the special cutting head of RAYT0OLS Swiss brand fiber laser machine to ensure high cutting precision and cutting efficiency. The cutting head is provided with a non-contact capacitive sensing device. The cutting head is equipped with extremely sensitive non-contact capacitance sensing device, which can realize very stable z-axis automatic tracking function, eliminate the impact of uneven plate on cutting quality, and thus improve the pass rate of the product. Laser cutting machine is equipped with focusing lens to meet the needs of cutting plates. Drawer type lens replacement, the whole replacement process is convenient and fast. Optical path system has the advantages of high transmission efficiency, stability, light correction, convenient maintenance, etc. The entire optical path system through the clean positive pressure air protection, to ensure that the cutting head of the optical lens and nozzle is not contaminated.
|
 |
Flake graphite cast iron with minimum tensile strength Pa. High carbon content and hardness. High shock absorption and wear resistance. Foundry cutting properties. Good lubrication, corrosion resistance and dimensional stability. Lack of sensitivity and lower thermal sensitivity in the bed. Reduce the loss of equipment in use. The machine precision can be maintained for a long time, the stability of the equipment is good, and the machining error of the vibration belt of the bed can be reduced.
|
 |
Introduction to laser generator (ruike)：
Wu Hanrui fiber laser technology co., LTD is one specialized is engaged in the fiber laser and its key components and materials research and development, production and sales of national torch plan key high-tech enterprise, with national key innovative team in the field of high power fiber laser and fiber laser technology state where engineering research center, is the world's influential from material and devices to the whole vertical integration ability of fiber laser research and development, production and service providers. The main business of the company includes providing various fiber laser products and application solutions for laser manufacturing equipment integrators, as well as providing technical research and development services and customized products for customers. The company's main products include 10W to 200W pulse fiber laser; 10W to 12,000w continuous fiber laser; 75W to 450W quasi-continuous fiber laser; 80W to 3000w direct semiconductor lasers. Products are widely used in laser manufacturing such as marking, cutting, welding, additive manufacturing and other fields.
|
- Prev:Laser cutting machine
- Next:none
